Featured Articles

IHS teardown reveals Galaxy S5 BOM

IHS teardown reveals Galaxy S5 BOM

Research firm IHS got hold of Samsung’s new flagship smartphone and took it apart to the last bolt to figure out…

More...
Galaxy S5, HTC One M8 available selling well

Galaxy S5, HTC One M8 available selling well

Samsung’s Galaxy S5 has finally gone on sale and it can be yours for €699, which is quite a lot of…

More...
Intel lists Haswell refresh parts

Intel lists Haswell refresh parts

Intel has added a load of Haswell refresh parts to its official price list and there really aren’t any surprises to…

More...
Respawn confirms Titanfall DLC for May

Respawn confirms Titanfall DLC for May

During his appearance at PAX East panel and confirmed on Twitter, Titanfall developer Respawn confirmed that the first DLC pack for…

More...
KFA2 GTX 780 Ti Hall Of Fame reviewed

KFA2 GTX 780 Ti Hall Of Fame reviewed

KFA2 gained a lot of overclocking experience with the GTX 780 Hall of Fame (HOF), which we had a chance to…

More...
Frontpage Slideshow | Copyright © 2006-2010 orks, a business unit of Nuevvo Webware Ltd.
Wednesday, 12 October 2011 07:20

Gelid Solutions Wing 12 PL CPU/Case fan tested - 2. A closer look at Wing 12 PL and Testing

Written by Sanjin Rados

gelid-wing12-thumbrecommended08 75

Review: Blue LED and good performance

Wing 12 PL comes in a plastic box. You’ll find specs, techs and other details on the back.

box-front pict

box-back      pict

 

The packaging holds four standard screws, four rubber anti-vibration bolts and one Gelid Solutions sticker. The power cable is about 50cm long and ends in a 4-pin connector. The Wing 12 PL has PWM control, but we can connect it to a three pin fan control connector without losing the option of manual rpm control.

 

gelid-wing12-all

Specification:

  Air Flow (CFM):                      75.6
   Bearing:                               Nanoflux Bearing (NFB)
   Cable Length (mm):               500
   Connector:                          4 Pin Molex
   Current (A):                         0.45
   DC Voltage (V):                    12
   Dimensions (mm):                 120 (l) x 120 (w) x 25 (h)
   LED Color:                           Blue
   Fan Speed (RPM):                 600 - 1800
   Noise Level (dBA):                10 - 26.8
   Static Pressure (mmAq):        2.66
   Warranty (years):                 3
   Weight (g):                         120

 gelid-wing12-top

 

Winglet blades, i.e. ends of the propeller fins, are curved and it helps with aerodynamics and increases airflow.

 

gelid-wing12-close

 

Maximum rpm of ~1800 produces 75.6/128.6 (CFM/CMH) airflow, which suggests that we have one really powerful fan here. However, it also suggests that the Wing 12 PL will not be particularly quiet when running at full throttle.

Direction of the airflow and propeller rotation is described in more detail on the Wing 12 PL’s side.


 

gelid-wing12-wind

 

NanoFlux bearing technology significantly decreases friction between mechanic parts and the Wing 12 PL seems almost inaudible when running at 600rpm. Special design enables the propeller and rotor base to be detached and cleaned, which is a big plus compared to classic designs. You can even wash the propeller, but we’d advise you to clean it well afterwards.

 

gelid-wing12-outside

gelid-wing12-outside-1

 

The Wing 12 PL comes with four LEDs in four corners of the fan. There is no option to turn the LEDs off short of turning the fan off.

 

gelid-wing12-glowing

 

We tested our Wing 12 PL in combination with Gelid’s GX-7 CPU cooler. The Wing 12 PL is part of the GX-7 package, which was reason enough for us to ask Gelid Solutions for another Wing 12 PL, in order to show potential GX-7 buyers just what two Wing 12 PLs are capable of. 

 

gx-7-test

 

We used GX-7 mounted on EVGA’s FTW3 motherboard in Corsair Obsidian 800D case (with three 900rpm fans) at 22°C room temperature. We measured temperatures at Core i7 930’s reference clock (2.9GHz). In our tables, we used average temperatures of all four cores. We used GC-Extreme thermal paste for all our testing.

 

gx-7-test1

The Wing 12 PL’s specs say that maximum rpm stands at about 1800, which has been confirmed by Scythe’s controller. However, after mounting both fans onto the GX-7, we measured that the fan pushing the air spins at 1890-1920rpm, whereas the one pulling air spun at 1800rpm. We measured identical results after we swapped their places. Both Wing 12 PL fans could be well heard outside the case as they were much louder than all the other fans. 

 

gelid-wing12-results

The results showed that the Wing 12 PL is a great performer. When we used only one fan, which spun at 1920/1950rpm, GX-7 cooler did well but was quite loud. While we wouldn’t call the fan too loud, it can definitely be heard. Gamers who have plenty of loud components probably won’t mind though, as they usually strive for raw performance.

Users will have a choice to make – you can either set the Wing 12 PL to run quietly and provide less cooling or let it be loud and get some nice cooling performance. The solution may be in another Wing 12 PL fan, because, as our testing showed, the GX-7 strapped with two Wing 12 PL fans at 990rpm provides both the performance and silence.


 

(Page 2 of 3)
blog comments powered by Disqus

Comments  

 
0 #1 Haberlandt 2011-10-13 03:42
You can take out the fan? Sweeet!
 

To be able to post comments please log-in with Disqus

 

Facebook activity

Latest Commented Articles

Recent Comments