Featured Articles

IHS teardown reveals Galaxy S5 BOM

IHS teardown reveals Galaxy S5 BOM

Research firm IHS got hold of Samsung’s new flagship smartphone and took it apart to the last bolt to figure out…

More...
Galaxy S5, HTC One M8 available selling well

Galaxy S5, HTC One M8 available selling well

Samsung’s Galaxy S5 has finally gone on sale and it can be yours for €699, which is quite a lot of…

More...
Intel lists Haswell refresh parts

Intel lists Haswell refresh parts

Intel has added a load of Haswell refresh parts to its official price list and there really aren’t any surprises to…

More...
Respawn confirms Titanfall DLC for May

Respawn confirms Titanfall DLC for May

During his appearance at PAX East panel and confirmed on Twitter, Titanfall developer Respawn confirmed that the first DLC pack for…

More...
KFA2 GTX 780 Ti Hall Of Fame reviewed

KFA2 GTX 780 Ti Hall Of Fame reviewed

KFA2 gained a lot of overclocking experience with the GTX 780 Hall of Fame (HOF), which we had a chance to…

More...
Frontpage Slideshow | Copyright © 2006-2010 orks, a business unit of Nuevvo Webware Ltd.
Friday, 08 November 2013 09:10

AMD blames PowerTune technology for R9 290X performance issues

Written by Fuad Abazovic



AMD official, there is a beta driver to fix it

We have waited for quite some time to get an update on the story that was brought to our attention by Tom’s Hardware. Basically Tom’s came to the conclusion that retail R9 290X cards run much slower than the review sample that they got.

We also added that our own press card tends to drop its clock dramatically after some time of running and we recommend you to read our original part here. Just minutes ago we got an update from AMD that there is the AMD Catalyst 13.11 Beta9.2 driver that is supposed to fix the performance fluctuations in such situations.

AMD sent us the following statement:

"We’ve identified that there’s variability in fan speeds across AMD R9 290 series boards. This variability in fan speed translates into variability of the cooling capacity of the fan-sink. The flexibility of AMD PowerTune technology enables us to correct this variability in a driver update. This update will normalize the fan RPMs to the correct values. The correct target RPM values are 2200RPM for the AMD Radeon R9 290X ‘Quiet mode’, and 2650RPM for the R9 290. You can verify these in GPU-Z."

So basically AMD’s PowerTune technology is to blame, as it wasn’t setting the cooler at the right RPM speed. We will try to see if this new target speed for the cooler will get us more consistent scores as we found out that the card will result will serious reduction in performance after a few runs of the same test.

When it gets hot the card throttles down, resulting in lower scores. We have a feeling that this is not the end of it, but overall in Uber, noisy mode, the card doesn’t have these issues but it is noisy.

You can get AMD Catalyst 13.11 Beta9.2 driver here.

blog comments powered by Disqus

To be able to post comments please log-in with Disqus

 

Facebook activity

Latest Commented Articles

Recent Comments