Published in Reviews

Accelero S2 passive VGA cooler

by on01 April 2007

 Image

Review: Arctic Cooling beats the reference one

 

Silence is a very important factor for computers and today we had a chance to play with the Arctic Cooling Accelero S passive graphic card cooling. Arctic cooling is a proven silence master. It's newest Accelero S series cooler features a completely passive design and comes in two flavors. The Accelero S2 is the smaller one and we tested it today. It is meant to quietly, or better yet silently cool a mainstream graphics card, and it is compatible with a wide range of ATI/Nvidia graphics cards up to the Radeon X1650/Geforce 7600 series.

 
Its mighty brother, the Accelero S1, can fight with faster and more heat dissipating graphics cards. Power Color sells its ATI 1950PRO silent cards with the new passive Accelero S1 series and the cooler is also compatible with all X1900 und X1800 cards. A wide range of Nvidia's cards is supported too, including Geforce 7950, 7900, 7800 and 6800 series cards.

 

The Accelero S1 has four copper heat pipes, while the Accelero S2 series features two of them and weighs just 202 grams. Its tiny copper base is not much bigger than the GPU itself and is surrounded with an aluminum plate used for mounting. The cooler has a large surface area, it is pretty tall and extends beyond the height of the graphic card. We tried to push it into an Akasa AK-ZEN-01-WH PC case and it fits. The Akasa case is a small one, which means that the S2 should fit in all standard cases. Arctic cooling uses aluminum for all 31 dissipating fins. They are placed wide apart, allowing air to easily pass through, removing the heat effectively. The whole mounting process is very easy and can be finished in just a couple of minutes.

 

Image Image

 

The box includes the Accelero S2, a short but useful manual and everything else you need for mounting. It comes with eight memory heatsinks. The package also contains a bracket with a lot of holes. The bracket should be mounted in a second slot and it lets some fresh air in the case and makes the cooling better. 

 

We used a Power Color 1650XT card with its cooler and then we mounted the Arctic Cooling passive cooler on it and compared the temperatures. Power Color uses a specially designed cooler rather than the ATI reference one. Its ok, unless you are a silence freak like our webmaster. The Power Color cooler is powerful, works silently and it's not necessary to change it with a passive solution. In a bushel of cards with the reference cooler we decided to compare the Accelero S2 with the Power Color`s one.

 

ImageImage

 

We used:


EVGA 680i SLI Motherboard
Intel Conroe Core2 Extreme X6800
Asus A8 SLI-Deluxe
AMD Athlon 64 FX-57
Corsair CM2X1024 8500C5D
Power Color X1650XT
Artic Cooling Accelero S2
OCZ GXS 850W gameXstream
OCZ PowerStream Power Supply

 

Accelero S2 is compatible with:

ATI: X1650, X1600, X1550, X1300,
X1050 series X850, X800, X700, X600,
X550, X300 series and 9XXX series
Nvidia:
GeForce 7600, 7300, 6600 series
FX 5950, 5900, 5700 (Ultra) series
FX 5600, 5500, 5200 series
GeForce 4 Ti, MX series
It measures
Heat Sink: 140(L) x 188(W) x 32(H) mm
Heat pipe: 6 mm x 2
Weight: 202 g
Accessories: 8 Memory Heat Sinks
Warranty: 6 Years

  

Arctic Cooling recommends that the case be closed during testing of the cooler, along with one or more fans installed on the case that blow the air out of the system. We did our testing in two scenarios. In the first one we tried out the Accelero S2 outside the case, and then we installed it in a closed case and did the tests all over again.

 

ImageImage

   

Temperature Testing (outside)

idle

load

 

 

Power Color cooler

33

62

 

 

Accelero S2

57

78

 

 

Accelero S2 (wind blow in the lab)

40

46

 

 

 

Accelero S2 needs air circulation, at least a bit of it. Without air circulation around it the fins are accumulating heat and you can directly see this on the GPU temperature. In load state there is a difference of 16 Celsius between Power Color cooler and Accelero S2. Even a light wind enables the Accelero S2 to work effectively, so we opened a window and door in the lab, making a small draft. We got much better results. The GPU was a whole 32 Celsius cooler and the Accelero S2 was out blowing its competition.

 

An average user will use this cooler inside the case so of course we tried this scenario, placing the cooler in an enclosed case where the case fans enable airflow circulation. We used two 12cm Arctic Fans for the PSU. The machine was very quiet yet again.

 

Image

   

Temperature Testing (in the closed case)

idle

load

 

 

Power Color cooler

44

58

 

 

Accelero S2

43

50

 

 

 

 

Conclusion

 

 

It needs a wind breeze but it will be the most silent cooler you can find. Accelero S2 costs around €15, while the bigger one, the Accelero S1, costs around €20.

Accelero S2 gives you better performance than ATI stock coolers and it will be better then the Nvidia stock cooler as well.


We are convinced, it does the job well and it doesn’t cost you a lot. We can easily recommend it to all who like their graphics cards served cool and silent. It fits in most cases and this should not be a problem either.

It is quiet, cheap and it does the job better than any reference one, what more could you ask from your cooler.


 
 

 

 

 

 

Last modified on 01 April 2007
Rate this item
(0 votes)