×

Warning

JUser: :_load: Unable to load user with ID: 78

Published in News

Intel boosts Thunderbolt maximum transfer rate

by on02 August 2021


Up to 80Gbps

Chipzilla is finally getting around to boosting the transfer rate of its Thunderbolt tech,

Thunderbolt 4 last year didn't boost the maximum transfer rate (40Gbps) over what was already available with Intel's Thunderbolt 3.

Now it seems that the next-gen Thunderbolt 5 will be like Thunderbolt 3 and will double the throughput up from the current 40 all the way up to 80Gbps, according to a leaked internal presentation slide from Intel.

The slide which was highlighting Intel's "80G PHY Technology" was posted on Twitter by the company's Executive VP & GM of the Client Computing Group, Gregory M Bryant, who is on an internal tour of the Intel Israel Lab.

The image however was later deleted by Bryant probably after he realised his mistake.  However, that was too late and it was on the interwebs by then 

Thunderbolt 5 looks to be bringing high 80Gbps bandwidth still using USB-C, which means the compatibility and adaptability of the next-gen interface should be easy, and according to what the slide says, it will be based on a "novel PAM-3 modulation technology".

PAM-3 or three-level Pulse Amplitude Modulation can transfer three bits of data (-1, 0, +1) in two cycles/ unit intervals, exhibiting an efficiency of one and a half (1.5) bits per cycle. This is 50% higher than single-cycled Non-return-to-zero (NRZ) or PAM-2 (two bits: 0 and 1) which is used in current Thunderbolts. However, this still doesn't explain the rest of the gains so there could be more at play here.

The test chips for the new 80G PHY to be used in Thunderbolt 5 are showing promising initial results and these test chips might be built using TSMC's 6nm FinFET (N6) process but this has not been confirmed yet.

Last modified on 09 August 2021
Rate this item
(3 votes)

Read more about: